How To Install Extra Insulation On Your Condenser Hose

If you have a condenser unit outside of your home, there are a few things you can do to make sure it is running efficiently. Since the condenser is exposed to the elements, there are quite a few things that could go wrong with it. Usually, these problems are easily fixable. One of the most common problems is that the condenser hose gets knocked loose or somehow gets a hole in it. Luckily, this is usually very easy to fix and prevent. This article not only focuses on how to fix a broken or loose condenser hose, it also explains how to reinforce your hose so it is less likely to have these problems in the long run.

Finding the Problem

The biggest issue with condenser hoses is the fact that most people fail to identify the problem. That is, if you are noticing reduced airflow in your home, you might not immediately check the hose that runs from the back of your condenser to the wall of your house. However, there are surprisingly a lot of things that can go wrong with the condenser hose. Debris can fall from the roof and knock the hose loose. You can accidentally nudge the condenser while walking by or moving things around it, causing one end of the hose to get dislodged. There's even a good chance that a rodent could chew through your hose. All you need to do is regularly visually check your hose. It is also good idea to run your hand by the hose while your condenser is running. If you feel any air escaping through the hose, there could be holes in the rubber.

Repairing your Hose

In most cases, if there is an actual hole or cut in the rubber, it is easier to just replace the hose completely. Condenser hoses are cheap and easy to change out. You should also inspect the hose clamps at either end. If these are bent, it might be impossible to firmly secure the hose. In fact, when you do replace your hose, you might as well use new clamps as well.

If you want to prevent your hose from getting knocked loose or damaged, you can easily reinforce it. First of all, after you secure the hose clamps, wrap several layers of duct tape around them. You can also get some foam tube insulation to easily wrap around your hose. This will protect your hoses from blunt force and reduce the risk of it getting punctured.

For more information, contact local professionals like A-1 American Services.


Share